Questions & Answers for: delay print wheelwriter 30 series

delay print How do I get the delay print function to turn off? As it is, I type a line and it only types out after I hit return. I would like to be able to have the typewriter actually type as I type ...

...Wheelwriter 30 - full letters print but they are light or missing parts - seems to print fine on one sheet of paper but anything more bulky does not give a good impression. Repairman changed platen ...

...old ibm. How do you do that? The delay print and justify are both on the far rt. of the keyboard pressing these keys turns the features off and on. if this dosen't do it you're keyboard is bad. ...

...delay print you can correct mistakes before you print - saves on correction tape If this is a WW6 it must have the display option to get delayed print there should be a slide switch on the display to ...

...print delay I've seen several references to fixing this, but they all point to hitting Print Mode, or talk about the display. Either this is a different series within, or it was a option that whoever ...

...Wheelwriter 30 Series 2 - Unserviceable What's available as a direct replacement for the IBM Wheelwriter 30 series 2 typewriter? A reconditioned WW 30 is available for 350.00 plus shipping. If you ...

...you turn off the delay print on Wheelwriter 30 seriesII? On the R. side of the keyboard is a key that says mode or print mode press it and the DL PRINT will go out on the display and it's done. ...

...wheelwriter 30 series 2. print type light yet it seems to be striking with enough force. Can I adjust the strike pressure some how?DM Put in a multi part form and type if the print is good on the ...

...wheelwriter 30 or similar. On the R. side of the keyboard is a key that says print mode press that and the dl prt will go off on the display. If you are only printing the tops of the letters the ...

...wheelwriter 30 series II electric typewriter only the top part of the letters typed are being printed. How do I get the whole letter to be printed? Push down on both ends of the platen and see if it ...