Questions & Answers for: Nortel default ip


...default password for the 1120E and 1140E IP phones. You sound as frustrated as i was. Use password for 2007 color phone " color*set" when promted for admin password. Further trick is to "down arrow" ...


WILL ASKE YOU ABOUT ENTERING PASSWORD..ON THE DISPLAY ..ITS ****STARS ON IT, PLUS TAP OK AND CANCEL default password 26567*738 The password you require is documented in the Nortel NTP


Question about 1140E

1 Answer

...D/E/F can be entered via the [3] key. For example, an IP Phone with MAC address 00:19:E1:E2:17:12 would be reset to "factory default" when the sequence **73639001931321712## is entered on the

Question about Business Series Terminal T7208 - digital phone

2 Answers

... You just need to have someone(system administrator) reset the password on your mailbox back to the default password. Good ...

Question about I2002 IP Phone w/Text Keycaps, No P/S

1 Answer

How do I reset an Ip i2002 phone to factory default Go into settings and it should be at the bottom "Restore to factory default"

Question about BAP120 802.11a/b/g Wireless Access Point

1 Answer

default use name and password with ip address of nortel bap120. For that Connect your router to computer with ethernet cable then you can access it with following default link. or ...

Question about 5530-24TFD 24-Port Gigabit Ethernet Switch

1 Answer

...default ip address for nortel 5530 ethernet routing switch Try here; The manual is available for this switch on ...

Question about Networks 7220 (NTE350BG) 802.11 Wireless Access Point

2 Answers

...default IP after reset? There is probably a reset button somewhere on the device, it is probably a small pinhole that you put a paper-clip into the reset. If it has its own http web page, there is ...

1120e phones keep rebooting The phone's configuration is likely corrupt and it will need to be reset to factory defaults and reprogrammed. To stop the reboot cycle, try this: - Connect the phone to ...

Question about 1120E

1 Answer

IP Phone 2001 You need to enter the "Make Set Busy Deactivate Flexible Feature Code" - the "Flexible" part meaning the system administrator can change it, so you'll have to ask. The default appears to

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Nortel Computer and Internet Experts

J John

Level 2 Expert

299 Answers

Vuk B

Level 3 Expert

717 Answers

Are you a Nortel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides