Questions & Answers for: Brother default ip

Ad

Question about HL 1230 Laser Printer

1 Answer

...default printer. Do you know the IP address for your printer if so follow instructions below. Press Start Select Run Type CMD then press enter Screen will open type the following " ping ...

Ad

Question about MFC 420CN All-In-One InkJet Printer

2 Answers

...a router? Did you install it on your PC as a TCP/IP printer? When you go into the printer properties, what port does it list? Have you tried resetting the lan setting to the factory default

Ad

Question about MFC 420CN All-In-One InkJet Printer

2 Answers

...IP address). (2) If a successful response is received, then proceed to Windows® 98/98SE/Me Peer-to-Peer print (LPR) troubleshooting. Otherwise, proceed to Step 4. 4 Reset the print server back to the ...

Question about HL-2170W Mono Laser Printer

1 Answer

...cannot be found... using wires to connect to the LAN of the router, having tried to reset to defaults, follow wizards, etc. I'm a novice and about to freak out. connect a lan wire from router ...

Question about HL 5250DN Laser Printer

1 Answer

...Default or Bonjour won't work. Easiest way in 'Add Printer' is to select IP and enter the ip address you used in the web browser. Then your 5250 should appear in the list with the correct driver. If ...

Question about MFC 490cw Color Inkjet Multi-Function Printer

1 Answer

...IP addresses in the default range for DHCP, the Subnet Mask and Default Gateway addresses will be THE SAME. If you have another device on your network that will be assign a fixed address, you would ...

Question about MFC 490cw Color Inkjet Multi-Function Printer

1 Answer

IP address compatible with your network. You do that by opening the Web admin interface of your router and assigning to the printer an address that is still free. Try 192.168.1.178 but that depends on

Question about MFC 490cw Color Inkjet Multi-Function Printer

1 Answer

...default factory settings (resetting all information such as the password and IP address information), please follow these steps. Before you factory reset the print server, we recommend that you print ...

...default printer. Worked fine yesterday. Had internet issues earlier. Had those fixed by carrier. Since you mention internet issues that your carrier fixed, I'd look at your local router. The router ...

...default setting for the printer is DHCP (automatically get IP from your router). If you have it connected you can either use the Brother software to locate it on your network (and set a static IP if ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment and Supply Experts

James Cagle
James Cagle

Level 2 Expert

481 Answers

Jim Keysor

Level 2 Expert

331 Answers

ctnozil

Level 2 Expert

270 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...