...deck in UP position. put the blades perpendicular to the front to back axis of the machine. Measure from the floor to the blade tips on the outside. record the numbers. turn the blades 90 degrees. ...
...deck,,,if there is any lift in it there is the fault,,the top nut has come off the blabe drive pully and let the drive shaft drop a little this will lower the cutting blade,,,fix it before the blade ...
...blades and encountered a problem in that the laft bade turns slower than the right the result is obvious and I have checked bekt tension it seems to be adequate I do think the head where the blade ...
...lift deck up to change blades on my 1800f country clipper myself i have a jack and jack stands, they work on lawn mowers as well as cars. often however it makes more sense to take the deck off the ...
how to change the blades Model 917.288033 i change my blades by using a car jack to lift it up to remove the blades
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...I changed the blades on mower. ever since when I engage the blades to cut the cutting belts comes off when changing the blades did you remove the deck and put one of the lift rods in the wrong
Question about Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348
...blades for maxiunm lift for mower vacumm There is no linement for the blades as the blades you buy now days has a great amount of lift just be sure you keep your blades sharp and watch your grass if ...
Question about 42 In 22 Hp Kawasaki Vtwin Hydrostatic Zero Turn Tractor
...Lift front of machine and secure, Use a pipe wrench over top of blade and against deck, to keep blade from turning, Use 1/2 " breaker bar to loosen bottom bolt, Remove blade, If the bottom bolt ...
Question about 42 In 22 Hp Kawasaki Vtwin Hydrostatic Zero Turn Tractor
lift Live oak lleaves, or twigs, my previous JD 42" deck with Gators was like a vacuum. a lot of oaks in south Florida They are different blade LOW lift blade and HIGH life blades. Sound like you have
Question about 42 In 22 Hp Kawasaki Vtwin Hydrostatic Zero Turn Tractor
...lift deck as high as it will go, remove spark plug wires from plugs, engage deck, lift and block one side under wheels, make sure it cant roll on you.. remove blades and install new ones. this is a ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions