Questions & Answers for: deadbolt works key

Question about Kwikset Locks & Locksmithing

2 Answers

...deadbolt with the key from the outside of my door, but now my key is stuck in the deadbolt. I have already taken the deadbolt off the door and the key has still not come out, so is there some way to ...

Ad

Question about B362 605 KA4 DBL CYL DEADBOLT 4 EA 20536728

1 Answer

...deadbolt is 1 month old. Locking it with a partial turn is okay but I turned lock with key completely clockwise until it "clicked" : then it impossible to open with key from outside. Alignment and ...

Ad

Question about B362 605 KA4 DBL CYL DEADBOLT 4 EA 20536728

3 Answers

...deadbolt lock. The key works fine to open and close the lock but I can only remove it in the unlocked position. Also, the thumb side lock will not move unles the key is in the cylinder. Any ...

Question about B362 619 KA4 Dbl Cyl Deadbolt Per 004 Ea

1 Answer

...works. I have deadbolt lock for a closet. The key no longer works and the door is locked. How do I get the lock off This must be cut and drilled out unless you gret a locksmith to pick the lock open ...

Question about Professional Door Lock installation Kit

2 Answers

...deadbolt. Worked fine but now while a key on the interior side works fine, a key used on the exterior simply turns 360 degrees without doing anything to the deadbolt. It sounds like the exterior ...

Question about B362 605 KA4 DBL CYL DEADBOLT 4 EA 20536728

2 Answers

...key lock that goes through the deadbolt and into the manual knob. This bar turns with the key, sliding the bolt on its track to lock and unlock the door. Once the lock is apart check the key in the ...

Question about POWERBOLT ELEC DEADBOLT

1 Answer

...works with the key in the deadbolt lock. I have a code entered that unlocks the deadbolt only with the key in the deadbolt. Your help is appreciated. Follow this link to find out how to remove the ...

Question about POWERBOLT ELEC DEADBOLT

2 Answers

...Deadbolt works, but when I try to remove the key in the unlocked position, I can not get it to come out at all. It allows me to lock it with the key, but I can't lock it and remove the key. I presume ...

...deadbolt from the inside (handle) unless the key is inserted on the outside. Its a new lock installed on a new door. It works (able to turn it to unlock it) fine with the key inserted.... not turned ...

...key without unlocking it. Now What? The deadbolt only installs one way, no chance to get one side upside down. There is no way to lock it and remove the key from the outside. Second, lock and unlock ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Locks & Locksmithing Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Are you a Locks & Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...