AC/DC Adapter Can anyone tell me what the dc voltage output of the adapter is? I was givin one of these monitors, but no power adapter. Thanx, Bill Hi, You would need an adapter that puts out 12 Volt ...
viewsonic n2750w i was just reading your post on the problem with the DC to DC converters in the model set can you give me a idea what component maybe gone and might be able to be replace. I live in ...
trying to pack I have a 22" viewsonic monitor and I am trying to take the stand and base off so that i can pack it--this isn't intuitive. Any info would be helpful. Please look here: ...
Question about 22" FLAT SCREEN CRT BLACK Monitor
monitor flashes on then off power light stays on whats wrong?? shows screen for about 3 seconds then goes black Some 22" Viewsonics will have worn out bulging capacitors in the power supply that ...
Question about VE710b 17" Flat Panel LCD Monitor
...always occurr. Does it do the same when use it with other PC, otherwise you may have failing DC filter caps that gining you unstable DC which can give you intermittent problems. ...
...fat tops for sure? Check the ECR of the caps? You will need to do the voltage checking on those DC filter caps. Please read my guide. Basic LCD monitor troubleshooting guide: ...
My ViewSonic N2230w 22 in has a menu locked and it cant change to a different input and im trying to unlock it but i cant i need to get it to unlock Press the Channel + and Channel - buttons at the ...
...22 inch LCD monitor with my Alienware m11x Rx2 laptop. (4g DDR3, Core i3 520um, Windows 7 64-bit) as an extension ofn my desktop. Naturally I would like to use the Viewsonic monitor at it's highest ...
Question about VA2226w 22" Widescreen LCD Monitor
...screen is dimmed all over, then it may be the power supply is unstable and not putting out clean DC which will cause some strange symptom. Basic LCD monitor and TV troubleshooting guide:
...It apart and tested the power supply board,240volts AC Is going In at the edge connector but the DC out connector shows no dc volts coming out. Check all fusible links (such as 0 ohm resistors)
Usually answered in minutes!
131 Questions
123 Questions
121 Questions
112 Questions
121 Questions