Question about DC14 All floors Bagless Upright Cyclonic Vacuum
dyson DC 14 lost suction to beater bar/ suction to hose/stick dyson DC14 has lost suction to the bottom/beater bar. Consttant suction to the stick/hose My Dyson DC14 had no suction...see if this works
...DC14 ANIMAL AND THE BELT WONT TURN. ALL I DID WAS CLEAN THE STRINGS OFF THE BAR AND PULLED THE BAR OUT. NOW IT WONT TURN WHEN I PUT IT BACK IN The bar is not atached to the drive belt or the belt is ...
it wont vaccum the bar wont move but there is suction at the hose end dyson 14 If the brush isn't turning you need to replace the belts. You can get replacement belts here: Dyson DC14 Belts
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
my dc14 wont stand vertically, it stands slightly leaning backwards? Hello, There is usually a stopper that you step down on to bring it down, its stopper should be loose, or needs to be replaced.
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
i have a dyson dc14 the vacuum has suction but the brush wont turn nor will the belt I just bought a dyson, they have a 5 year warranty on parts and labor, maybe try calling them.
DC14 wont turn on, Was cutting in and out and now wont turn on at all. Have cleaned all the filters and checked for loose wiring and all ok. Is there a fuse??? My Dyson DC14 will not run. It will turn
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
Dyson DC14 Animal: Loses suction when in the upright postion and I am using the wand. I have cleaned the top spongy filter. It sort of 'blows' out of the top of the cylinder if that makes sens
Question about DC14 All Floors Upright Vacuum Cleaner DC-14
...wont turn on in the upright position With no suction you should check the venturis. They can become clogged if you suck up wet dust, wet cat litter, etc. You'll need a Torx Screwdriver to get it ...
Question about DC14 All Floors Upright Vacuum Cleaner DC-14
My Dyson DC14 brush bar does not sit flush with the carpet when using, hence the suction is not sucking at the floor. The actual brush bar does not sit flush with the floor when using the Dyson ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions