Questions & Answers for: dc07 cyclone spinning

...DC07 today from woot (soooo excited!!) Put it together and started to run it...picks up beautifully...but after a few minutes running, I notices inside the canister no cyclonic action going ...

...dc07. the cyclone assembly will not spin when dirt is picked up, but when I change them out the vacuum is fine, so I know it is the cyclone assembly. Any suggestions? thanks! ...

Cyclone not cycloning. My Dyson DC07 has stopped spinning it's debris around in the cyclone. I have washed the filters, checked all hoses, but to no avail. It is quite old. It seems not to have the ...

...animal http://www.sparesaver.com/help-and-support/dyson-section/dyson-technical-advice-450/dyson-dc07-technical-advice-459/dyson-dc07-changing-the-clutch.html - Use a Troxx 15 screw driver to take ...

cyclone area, but it still wont spin. Cleaned top filter and brush at the bottom. Belt is fine, Suction seems ok at present. Do I need a new bottom filter? Even thought the belt may look fine the belt

...spinning. The belt is probably worn or stretched. Here is a link for the instructions on how to change the belt and a link for the belt you need: DC07 Belt Changing Instructions Replacement belts for ...

the bottom brush does not spin although you can still get suction from the hand held pipe Have a look at the following link: http://www.dysonmedic.com/DC07%20Folder/DC07%20page.html

is the cyclone suppose to be spinning when you vacuum? I have a Dyson DC07 The cyclone doesn't spin on the inside. The dirt will spin due to the cyclonic currents inside the canister.

dc07 has lost suction on the roller, but not on the hose there are no blockages cyclone still strong any ideas thanks Are the brushes in the base of the vacuum spinning? You wont get much suction from

Describe your DC07 Bagless Upright Cyclonic Vacuum ProblemWe have an Animal..brush spins, motor works, NO suction except through the hose attachments! Hi, We tried all above an still no suction on ...