Questions & Answers for: dayton pool pump wiring

dayton mfg time switch for pool pump no info on the switch, model no or anything other than mfg. 240 V to a GFI to a throw switsh to the pump motor.Switch is 5 pole (A,1,2,3,4) How do I wire this ...

Dayton 5PXG3 motor has only L1, L2 and ground. How do you wire that? The motor should work if you connect the black wire to L1, white wire to L2 and green wire to ground. The red wire should be cut so

dayton wiring diagram need diagram to ghange wire connections from 220 volt hook up to 110 volt Wiring diagram should appear on side of motor. Dayton is sold by grainger. Contact WW Grainger with ...

pump will not pump or turn pump is very hot and will not **** or pump If you can rotate the shaft replace the capacitor, if not replace the pump. This is a general rule I follow. I do not know your ...

wiring diagram for dayton motor 11/2 hp 110 volts/220volts model#8k323c should be schematic on side if not contact manufacturer