...want to ask how to adjust the exposure lamp. Problem: blurd copy if set to auto. If we set on full dark copy is ok. Try cleaning the Auto Exposure sensor, or disabling the AE feature in standard ...
help with code sc546 on the display the message came up to call for service with the code SC546what can I do to fix it myself. the machine is not working for printing need model.but in most it's a ...
Question about DSm645 Digital Imaging System
...are lighting usually upper and lower Also check the imaging lamp to be sure it does not have any dark burn marks on it and clean the mirrors and the glass under the coy ...
Gestetner 3222 The display "Add Toner" is on and the machine will not copy even though I put a new cartridge in? I have a DSM622sp and am having the same problem, the PCU was just replaced a week ago ...
...but had no user manual, would like to get one. The problem is it is printing 'patchily' , light and dark patches on the same page - do not know how to fix the problem. User manual is going to be hard ...
Question about 2212 Digital Imaging System Copier
The display says following output tray is full. The display says following output tray is full. Remove paper. Internal tray 1 I can't find any tray that is full. Look at the area where the paper just ...
...display too dark, now can't read it, so I can't control the machine, nor can I readjust ''contrast'' Vince No matter how dark the contrast, if the room is dark you will be able to read it well enough ...
I'm getting about a 3 inch dark watermark across my pages when printing or copying. Where is that coming from? Thx Jerry lefler Odds are you are not getting a water mark on your paper unless you are ...
DSC224 printer displays low on fuser oil Filled tank with proper oil. Tried reset in service as found by searching in past posts. 107 5810 execute etc. Still have "fuser oil almost empty " ...
NEED DARK COPIES please increase the density of the copy.
Usually answered in minutes!
33 Questions
21 Questions
25 Questions
22 Questions
