Questions & Answers for: dacor gas oven open door

Oven door won't open I've had a Dacor ERD36 for over 4 years. A couple of days ago I used the oven with no problem, but today the oven door won't open. I did not use the self cleaning feature on the ...

Oven door won't open Hi - My husband tried to use the self-cleaning feature in our new home's oven, but turned it off before it finished. Since then, the door will not open (I moved it manually, but ...

Dacor Gas wall oven Hi, I have a Dacor gas wall oven . The door does not seal good and the door stop arm keeps coming off of the roller and then the door will just fall when opening. Can anyone help ...

oven clean with my Dacor and now it won't heat up again. I press bake and set the temp for 350 or so. The display starts at 135 and stays there. No heat. It reads 135 pre heat. I turned the breaker on

Dacor oven will no heat. Oven door was left open while cooking and now it will not heat. I know there is a reset button for this type of a problem, can you tell me how to access it on model # RSD30 ...

...Dacor rsd30 have an internal circuit breaker? Heating elements top and bottom quit working after oven left on for 30 min with door open. Hi!!!you seem to have a problem with your hi- limit switches ...

Dacor range works well. It is gas cooktop and electric convection oven. The issue here is that the oven door will not close completely. I can push it shut with little effort, but it does not stay shut

...GAS TO FLOW? THE BROILER HAD A PROBLEM WHEN I PURCHASED THE STOVE AND HAD TO BE REPLACED. IT WOULD LITE THEN IT WOULD POP AND THE DOOR WOULD BE BLOWN OPEN. DACOR SENT PARTS TO FIX THE PROBLEM AND IT ...

...a Dacor ERD36, How do I remove and replace the oven door hinges? most ovens , you open the door half way, then pull straight up the door will come right off, then you have full view of hinges and ...

...oven open door fully left and right hinges have a tab at the top of the hinge close to the range pull both down then close door to approx. 45 degrees till door won't close then pull strait up ...