Questions & Answers for: cylinder head change

...cylinder head of daihatsu charade 3 cylinder engine timing order, valve clearance, head bolt torque and change oil intervals Which motor? can you help me,what number of torque i use to my 3 ...

Ad

cylinder head. 1.1.6. Remove all three spark plugs out from cylinder head (straight forward). 1.2. Back cylinder head bank spark plugs removal: 1.2.1. Remove the inlet manifold out from cylinder head.

Ad

Question about 2005 405

1 Answer

cylinder head, and the head gasket, and presumably have you brought your cylinder head to a machine shop and shaved the head cylinder, changed the oil thoroughly? A hydraulic test could be done to the

...Cylinder Head Print Removal & InstallationLeft Side Before servicing the vehicle, refer to the Precautions Section. Drain the cooling system. Properly relieve the fuel system pressure. Remove or ...

Question about 2005 Korando E

1 Answer

head cylinder problems The head cylider repair shop did skim and shim my Head cylinder and replace valves on it but if you build it back in then the engine is sirt of stuck but if you remove the head ...

Question about 2005 Korando E

1 Answer

cylinder head noise The car when at starting rave of 1.5 rpm makes a rattling noise like dry bearing. When you r going up a steep road, the rattling increases. On neutral there is no noise. After much

...Cylinder Head 1 AutoZone com here's a link for the 3.5 engine. Repair Guides Engine Mechanical Components Cylinder Head 2 AutoZone com You can go to youtube and search "Torque head Bolts". They have ...

...cylinder head gasket or a small crack in the cylinder head. Is the head aluminum? Make and mileage of the vehicle will sometime help as some vehicle makes are notorious for head gasket problems. This ...

...head ? Check timing belt/condition to see if timing has jumped. Another possibility is cylinder wash down caused by water entering the cylinders wiping away the oil inside the cylinders. This could ...

...cylinder head bolts (with new bolts and with the correct torque settings)when fitting it to the engine. ) 1. Are there any cracks in the cylinder head. This must be tested, 2. Are there any cracks in ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...