Questions & Answers for: how to cut granite

granite cut to go behind the stove? It doesn't look right. Our installer put a plug on the stove. Do we need to cut a hole in the wall and take out the plug and hard wire the unit into the electricity

...granite as you cut through Good luck use comet cleanser to remove pot and pan marks. Unless they are deep scratches or gouging. I would call your local Kott Koating dealer and have them re-glaze the ...

are too wide for our granite counter cut out. You will either have to go with a different sink or contact a local granite dealer and they can send someone out that can enlarge the hole for you on site

...granite top maker with a bridge saw to cut it for you, nice and straight. Then polish the cut edges that show. That stone you have is a pretty tough stuff, you can polish it easier than granite, and ...

...to send a couple workers out to cut the existing granite for your new downdraft.Feel free to contact me if you have any questions.Brandon ...

...for granite sink oc3322-1, cut-out already done for counter top, ready to put in There should be a clip kit with the sink if not contact moen you should already have this its part of the ...

...granite with a razor blade to get the glue or whatever was on it off. I would run into a place and the razor blade would cut it but it left a chip so I stopped. I did the entire top and their was a ...

in and cut out the mark and install a glass "hot" resistant spot. What i would recommend, cut out the burn and install a ceramic that matches the existing granite so that you can place hot items on it

granite, or am I stuck with it this way? He put calk on it but I think that will not be easy to clean when food gets on it. Is it possible they cut the hole wrong? Call the installer. Did you pay them