Questions & Answers for: cuisinart coffee bean grinder work

...coffee beans into the grinder, added the water, and was greeted by a loud spinning whine, instead of the loud spinning of grinding coffee. I took the beans out of the grinder basket, put the cover on ...

...cuisinart coffee grinder for a couple years or less and the first problem was that the switch that determined the amount of cups quit working, so I got over that by holding it down while the coffee ...

...coffee bean go .remove the bean, in the hole were the coffee goes you see the grinder wheel clean the grinder wheel with a brush you may have coffee residue on the wheel thanks for using fixya ...

...grinder. I have cleaned out the top and removed the container holding the beans to clean with the brush. However, it still doesn't work. Make sure the filter basket is in the open position, and that ...

...area near the grinder motor - use the brush that came supplied with the Cuisinart to clean that area out. Once thoroughly cleaned, try one more time to Grind. Let me know if it works. -Tha Mp3 ...

Cuisinart grind and brew 10 cup grinder stopped working It worked yesterday. I did grind the coffee a couple of times because the grinder hasn't been working right lately. You can hear it working but ...

cuisinart coffee grinder keeps clogging coffee grinder keeps clogging, how do I clean it Unplug first. Unscrew the top. You need a long thin screw driver Phillips head is the best. Pock around the ...

...Cuisinart Grind and Brew is broken. grinder stopped working. Instead of grinding, the motor barely hums and does not spin blade at all. It will make coffee but only with grounds and not with whole ...

...Cuisinart coffee bean burr grinder and then after about 6 sessions of grinding, I was not able to get the start button to work. I cleaned the machine as much as I could where the slide-out drawer ...

coffee in basket and we just get a pot of water. try to check any clog.. My grind and brew Cuisinart stopped grinding after I cleaned it the first time. Tried everything I read in manual and on fixya,