...cuisinart the blade was removed by removing the plastic bottom. Make sure the unit is unplugged. Remove the four rubber pads on the bottom. This was the hardest part because the pads are glued so ...
...cuisinart removable bowl is stuck, rotates in the housing but does not come off. Unplug the unit from the AC outlet. Remove the six screws that hold the lower plastic cover on the motor base (four ...
...Cuisinart had made the pin more tapered and the hole in the brass bushing to match, much like a Jacobs taper on an industrial drill press spindle, this would be much less of a problem. BOTTOM LINE: ...
...Cuisinart BFP-730 The steal chopping blade is stuck in the bowl and attached to the gear box. Will not move up or down. how do I get it out? The steel blade won't come off the stem--so neither can I ...
Question about DLC-5 Food Processor
bowl does not depress microswitch of Cuisinart processor the interlock switch will not permit operation Cuisinart does not have the original pieces available, but you can order a replacement work bowl
bowl, blade, etc. completely from the base of the food processor. Plug the base in and turn the food processor on. Then use a pen to press in the dark gray or black button on top of the processor - if
...bowl stuck. The work bowl on my food processor is stuck on the base and won't release. What can I do to release it? Hello. It will release. Just use a wooden spoon wrapped in a towel to gently tap on ...
...bowl arrangement... Then I put Cuisinart on my list of DO NOT BUY ... anything can have problems, but something obviously this chronic should be handled better by the manufacturer ... it should have ...
Question about SS Grind Central, removable bowl w/ cover Grinder
...bowl is stuck, then gently pry it with a thin flat edge screwdriver. If the bow is separated from the base then you will have to glue it. Watch the youtube video to see how she removes a bowl that is ...
Question about SS Grind Central, removable bowl w/ cover Grinder
...Cuisinart 14 cup Bowl is off base and safety pin is stuck poking down. The white pin will not retract It sounds like the safety interlock system on your Cuisinart 14 cup food processor is engaged, ...
Usually answered in minutes!
89 Questions
72 Questions
69 Questions
104 Questions
47 Questions