Questions & Answers for: cub cadet cut reverse

Cub Cadet LT1018. When I go into reverse the Cub Cadet LT1018. When I go into reverse the engine shuts off. This also happens when I engade the PTO. However, if I have the brake applied when I engage ...

Cub Cadet Model LT1042 (2007) The reverse mode does not function.I turn the switch to reverse mode & push the button for reverse mode and the light does not indicate on and I cannot reverse mow ...

cub cadet starts but won't move forward or reverse ? what should i try to do? What model? I have a 1554, that I just took to the dealer, for repairs, for the same thing. The motor starts, the blades ...

...Cub Cadet 2042. With the switch in ''normal'' and the PTO engaged, when going forward cutting the grass the PTO will disengage for no apparent reason. You have to push the PTO knob in and then out to ...

...for my cub cadet lt1045 my cub cadet will not start after it was turned up on baack side and i need to check all my safety switches i think brake pedal,seat,on the rear axle for reverse cut

...Cub Cadet xt1, namely the seat cutting out the engine when off and not being able to cut grass in reverse? Why do you want to disable these features? The mower is designed to cut going forward, it ...

cub cadet XT1 42" cut. Today got on it if I pressed reverse or forward wouldn't move. After a minute or 2 running it moved but, had to push peddle to full to get about 1/2 speed.is 1year old. Possible

...cub cadet rider back fired and shut down I added oil and started it would not move while applying forward pressure under deck I found a black wire cut up is this why no forward or reverse? every ...

...Cub cadet 60in zero turn won’t move forward but will move in reverse. Was cutting lawn just fine then it stopped. Check hydraulic fluid levels. Also, have the control levers suddenly changed position ...

Cub Cadet LT1050 PTO works fine until letting off gas then PTO disengages. In order to keep the blades turning when letting off the gas, I turn the key switch to the reverse mode and push the button ...