...crown victoria jerks at 40 mph jerks at 40 mph and really want to know what it is sound like torque converter problems.scan it to check torque converter.make sure it is applying and releasing .if not ...
...Crown Victoria runs rough when first started, idles smooth after a few minutes but has no acceleration before running for 20-30 minutes. Replaced the egr valve..little help, loses acceleration on the ...
...crown victoria no oil pressure and its making a knocking noise. there is no water in the oil. I have a 2003 ford crown victoria. thank you KNOCKING NOISE IS NOT A GOOD SIGN.SOUND IF YOUR ENGINE OIL ...
...Crown Vic, 4.6L SFI, OHC V*. cant fake oil pressure, if its ok now don't worry about it. check connector and make sure its on correct and clean. If you start getting low pressure consistanly then get ...
low oil pressure do not drive it u will destroy the motor quickly Sooner u find out this problem the better But as a said more than likely just bad gauge but dont count on it check it out Mine did the
knocking noise from the bottom of the motor and low oil pressure Sounds like its about ready to throw a rod.....Might want to sell it before it quits
crown victoria oil gauge goes from high to low and then stay under the low when i checked the oil it had plenty but it sounds like my motor is tapping please help!!!!!!!!!!! You may need to change the
...i stop 1. You are low on oil. 2. The engine/oil pump is worn and no longer provides sufficient oil pressure at low idle. 3. The oil is very dirty and needs to be changed. check and change the ...
Question about 1993 Crown Victoria
...Crown Victoria low on oil and noticed the oil pressure gauge bobbing up and down. I changed my oil and added Lucas Oil treatment to it. After 3 weeks, while at a stop light, I heard a crackling sound ...
Question about 2006 Crown Victoria
...crown victoria lx 4.6L at idle and at normal operating temp? Mine is reading between 15 and 25 psi. Has 149,0000 on it. 15 seems low. Ford gives a spec of 40-70 psi with the engine speed @ 2500 rpm ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
