Questions & Answers for: crown victoria climate control

...Crown Vic w/ auto climate control blows only out defrost and floor vents reguardless of setting, how can I get a schematic for the blower doors and such, to trouble shoot? those control units in the ...

Ad

...Crown vic LX Sport..Blower motor inop car has auto climate control. blower stopped then worked again then stopped again. The blower motor might be bad,turn it on,high blower,and bump the blower motor ...

Ad

...Crown Victoria climate control fan not working. Fuses good, fan motor works when wired direct to 12 volts, voltage going to fan 1.5 Volts does it have a digital control panel? As this uses an ...

...crown vic will not change off from defrost, indicator lights show floor and vent when pushed but air flow stays on defrost, it does have automatic climate control if that makes any difference Check ...

...it may be climate control (3w7z-19980-aa) at abt $700. Others say to ck the blower speed controller. How can I narrow down the problem'' I was told by the Ford Dealer to replace the blower

blower on 2002 climate control only works on high blower on 2002 crown victoria climate control only works on high COULD BE BLOWER MOTOR RESISTOR OR BLOWER MOTOR CONTROL SWITCH IS FAULTY.

Question about 2007 Crown Victoria LX Sedan

1 Answer

climate control controls the temperature and air distribution by vacuums lines and in the automatic climate control, controls the temperature and air distribution by a series of blend doors that works

Question about 2001 Crown Victoria

1 Answer

crown victoria Climate control is stuck on heat ned to remove the radio and look at the blend door actuator on top of the hvac box. the actuator goes bad and doesn't move the door from hot to cold

where is the temperature control valve and how is it replaced air conditioning does not work If the car has automatic climate control, there should be a plastic valve in one of the heater hoses.

Crown Victoria. If it's cable driven, the cable may have broke the plastic piece it's connected to behind the knob not allowing the turn knob to turn the blend doors through the cable. To find out you

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...