Question about CE2000 2-Channel Amplifier
...crown ce 2000 watt amp. channel 2 keeps turning off crown ce 2000 watt amp channel 2 keeps turning off Do you get any Fault indications? Have you swapped the speakers around to eliminate them as ...
...crown ce 2000 isn't working, I replaced it but it still doesn't work... There is a fan drive circuit in these that will control the fan speed depending upon the load on the amp. It sounds like this ...
CE 2000 crown amp. need parts R 33 (crown did have stock) R 36 crown said they dont see it in their list also LM4701T crown also said they dont know what that part is. i have researched and found many
...ce 2000 be converted from 110 volts to 240 volts ? How much would it cost? You could get an outside box called a Step down transformer that would deliver 110 volts to the amp. A quick look on Google ...
I get just a humming sound out of the 18" B-52 sub with my Crown CE-2000, there are no fault lighs Check out the Electrolytic Capacitors in it. Suspect the largest ones first.
...Have you considered the input and the speakers? Register and download the manual for free at retrevo.com http://www.retrevo.com/support/Crown-CE-2000-Amps-manual/id/22150ag314/t/2/ See page ...
this is for the crown ce 2000 power amp. thanks It works on demand. Register and download the manual for free at retrevo.com http://www.retrevo.com/support/Crown-CE-2000-Amps-manual/id/22150ag314/t/2
crown ce 2000 Depending on the configuration of speakers you have it will deliver different amounts of power up to 1950 watts when used to power a single 4 ohm speaker. Typical usage would be powering
...crown ce 2000 is on both channels It sounds like your output transistors are bad or power supply problems. You will need to have it serviced unless you know about electronics and how to repair ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions