Questions & Answers for: crankshaft position sensor 2003 dodge

fine. 2002 Dodge Ram 1500 Quad Cab with 68,000 miles Have it sacnned for a code. it seems to be the speed sensor at the tranny.or the crankshaft position sensor. hope this helps. will you please vote

Where is the Crankshaft position sensor on a 2000 dodge ram 1500 with an automatic transmission in bell housing, behind right cylinder head.

where is the crankshaft position sensor on a 1997 dodge ram 1500 4x4 with a 360 motor It is in the top of the bell housing on the passenger side

...crankshaft position sensor is located on the passenger side of the transmission bellhousing. Remove the two mounting bolts and unplug wires from connector. Install the reverse of removal. Hope this ...

...crankshaft position sensor is located on the same side (right) but is at the opposite end of the engine between the bell housing and the block. The crankshaft position sensor can be replaced without ...

...dodge ram 1500 i have change iac tps map sensors still idling high rpm is about 1400 exhaust getting red hot sucking air at back of throtlle body code po505 i have changed iac tps map sensors and ...

...just batt new distrib and rotor, position sensor, crankshaft position sensor battery and alt are ok I assume you checked and are missing spark? have you unplugged the cam sensor and tried to

...Crankshaft position sensor Replaced the two sensors due to a DTC pointing to the Crankshaft Postion Sensor. Now truck is hard to start and is putting out the 4 new DTC codes. Do I need to reset the ...

...is controlled by the PCM (computer). The PCM will shut the ASD relay off if it doesn't see a signal from the crankshaft position sensor. Check that sensor and the wiring from the sensor to the

just guess and change them? Crankshaft Position Sensor? Camshaft Position Sensor? A pro grade scan tool computer can diagnose electronically. https://www.google.com/search?q=auto+electrician+near+me .