Questions & Answers for: crank shaft position sensor 1990

Question about 1990 Prizm

2 Answers

1990 Geo prizm I had a fire under the hood. The wiring caught on fire that is underneath the overflow from the radiator. A few wires I think I could replace, if I could get a diagram. Wires to fan ...

Ad

...geo prizm air intake sensor has no power both from the air filter housing and on the from engine mount by the fan. Could how do I test the ECM for trace the line for problem? use an electrical tester ...

Ad

Question about 1992 Prizm

1 Answer

...shaft that turns with the serpintine belt? there should be a mark on the lower pulley (aka crank) there should be a place to keep the light pointed at . if you cant find it . my have to buy a manuel. ...

...on cyclinder #4 No damage on cyclinder walls and minor damage on crank shaft. Can the rod be changed from the bottom without removing the crank shaft? No valve damaged. no you got to take the head ...

...crank and if hole cam shaft should be up or down? 1990 geo prizm it's not customary for the timing marks to be in the groove surfaces of a pulley. remove # 1 spark-plug. Remove fuel pump fuse to not ...

...check if you have spark if theres no spark check your distributor or coil packs if you have coil packs check the crankshaft position sensor that sensor if its bad could cause a no spark

1990 Geo Prizm GSI will start, but it won't keep running when the weather is cold. Sounds like the automatic choke control on the carburator is shot! It is stopping the proper flow of gas from

...Position (CMP) Sensor Resistance (Cold) Between Terminals and 2.......185-275 ohms Camshaft Position (CMP) Sensor Resistance (Hot) Between Termuinals 1 and 2 .........240-325 ohms I am quoting this ...

why is oil coming out around timing belt cover 1990 geo prizm why is oil leaking out of timing cover? cam and front crank seals.. sometimes the rocker cover gasket leaks in under there as well

...crank position sensor 1.8 1995 geo prism read toyota nation its there. http://www.fixkick.com/PRIZM.html it must be timed in the correct way its also covered in the FSM and alldata.com your

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...