table saw model 4000 my table saw started to make a high pitched sound and when it was turned off, i could easily spin the blade. Nowl, it doesnt want to spin, the blade locked up. Some one was saying
motor spins blade shaft doesnt the motor spins but blade shaft doesnt is ther a shearpin? if so how2 get2? some table saw motors have a set screw that can be tightened with an allen wrench
...craftsman table saw I have a 10" craftsman table saw. The whole motor and saw blade do not line up with the rip fence .When I try to line them up, I"m about an 1/8 of an inch off from the back of the ...
the motor spins but the blade does not; the blade is not loose It sounds like your belt from the motor to the saw is too loose has to be tightened.
...table saw, I can hear it humming as if the motor is hung up, but the blade does not move. With the power off, the blade turns freely. Also, I removed the belt and it makes the same sound without the ...
...saw, blade continues spinning for 90 seconds or more. Unfortunately, this is common on older model table saws. They do not have a blade brake and as far as I am aware it is nearly impossible to ...
...Craftsman 8" table saw. The manual has a copyright date of 1954, but the saw is in new shape, so why replace it unless I need to. The issue is. I replaced the original 3/4 hp motor (because it ...
...Craftsman table saw model 315.210050 - turns on and the motor spins, but the saw blade doesn't - what can I do? Is the shaft turning...? if so then refit the blade . If the shaft is not ...
Question about 10" Table Saw
...Craftsman 10" table saw, model-number 113240421. It is for a Craftsman 10" table saw, model-number 113240421. The orignal screw is bent and cannot raise or lower the saw blade. try here CRAFTSMAN ...
...craftsman 10" table I have an older craftsman 10" direct drive table saw. The saw will not start on it's own, the blade tries to spin but can't get up to speed unless I, sounds crazy, "kick start" it ...
Usually answered in minutes!
386 Questions
103 Questions
81 Questions
63 Questions