Questions & Answers for: craftsman 1 hp compressor problems

...Craftsman Forum & Repair Information: http://www.sears.com/shc/s/nb_10153_12605_NB_CSHome 3rd Party Regulator Retailer: http://www.controlair.com/ If you feel that your problem is too serious for you ...

craftsman compressor 1/3hp 3 gal just stopped building pressure past 40psi keeps running though Had the same problem myself. Replaced the piston and now runs like new.

Craftsman Air Compressor as a gift. Have used it ONCE for tire inflation. Went to turn on this weekend, and the unit it trying to cycle (lights dim, and it buzzes), but no compressor. The unit has Oil

...Craftsman Air Compressor not Compressing Got a 1hp 4gal 2 tank Craftsman Air Compressor as a gift. Have used it ONCE for tire inflation. Went to turn on this weekend, and the unit it trying to cycle ...

...1 HP 4-gallon craftsman A/C was working just fine and then would not pump beyond 30-40 lbs. And of course it did not kick off at 110 lbs because it never gets there. I replaced the tank pressure ...

Craftsman 1 hp 3 gallon air compressor will not go above 45 psi, what could be the problem. check and see if the inlet valve is plugged this is a thin metal valve at the top of the cylinder if this is

1 hp air compressor and it will only build pressure to 27 lbs. If it makes hesitation sounds just before shutting off, you need to oil the compressor as per the manual. This is the most common problem

compressor wont start just hums Could be a seized compressor, a bad start relay, or a problem with the pressure switch or a bad motor.

my compressor making a weird humming noise and not working what could be the problem Check to make sure you have the right volts comeing to your compressor 120 volt any thing less then 10% can make ...

...craftsman pneumatic 1/2-in drive impact wrench. And used it with my craftsman 4-gallon 1hp air compressor tried to loosen the bolts on my car wheel wouldn't loosen them help Pneumatic tools are rated ...