them twice and also cleaned the contacts. please help...... Did you remove the protective tape that covers the ink cartridge contacts and print heads before putting them into the carriage
cover to position the letter size pages to be copied or scanned. Sincerely, Steve I also just found that I have the same problem. I called HP and of course it is out of warranty. I have only scanned a
Question about Photosmart C5180 All-In-One InkJet Printer
...HP C4150 All in One printer, it prints a cover page/seperator page. I would like to turn this off, would you be so kind as to send me the information to do that. Respectfully, K. Go to the printer ...
...Serial Bus (USB) cable from the back of the product, but leave the product turned on. Open the cover of the product and remove the print cartridges. Close the cover and wait for the Insert Ink ...
Question about Photosmart C5180 All-In-One InkJet Printer
...HP Photosmart Pro B 8190 I do not know how to put in the new printheads to replace faulty printheads. Open the front cover of the printer and replace the catridges. For more info, download the manual ...
paper jam Open the back cover,and check properly if there are any particules of dost,clean the carrieer very well and make sure the back cover is properly intact.
Question about Photosmart C5180 All-In-One InkJet Printer
Shows paper jam but no visible sign of jam Open it up and follow the paper path. The paper sensor should be visible somewhere. The paper sensor could be stuck, dirty or defective. Maybe covered in ...
HP C5180 Try this: With printer turned on, remove the USB cable and then remove the ink cartridges. Close the cover and wait until you are prompted to insert cartridges. When that happens turn off the
c5180 display turned white after resetting the printer and put on the cover at the side where energy and internet cable is, the display turned white and printer doesn't work. before putting on the
Question about Photosmart C5180 All-In-One InkJet Printer
...cover of the scanner part of my HP C5180 all in one printer I just want to apply a little bit of lubrication oil, because the is a very enneyong 'dry' sound during scanning. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions