Questions & Answers for: countax cuts

blades not cutting checked all belts they are ok but not driving blades countax c300h tractor Either the belts are worn making them too loose, or you may have a spindle issue there. Check the spindles

...countax  k18 is needed for this season for my buisness, after about 10 or so minuits it cuts out on me, no deck attached And i havnt engaged or disengaged anything... any ideas?? its defo ...

...countax k14 used it for about one hour running nicely, then suddenly when i place it in gear and release brake it splutters and cuts out, cutting gear wont engage either ... i am not sure if it is an ...

Where can I get a replacement cutting deck for a Countax K14 tractor mower? Not sure of your geographic location but here is the contact data for Countax: http://www.countax.co.uk/contact_us.htm Call ...

Countax D50Ln, Starts, but after 8 seconds cuts out, time ,after time,after time, Every thing alse is working, ANY advice, contact cliff. did you fix the problem?

countax 4.1 whole upper body leaning to the right The body is leaning to the right this has nothing to do with the cutting blades I repeat the body of the tractor is lob sided First thing, check your ...

Where can i get I a new cutting deck for my old countax c300h? I am in Leicestershire and would like it fitted also. Thanks I would like someone to supply and fit a new cutting deck..ideally doing it ...

Countax k15 need to tension the cutting blade belt how do i do this there should tension pulley on the deck if its tight replace streached belt with new one that is what is w2rong not unless your ...

Countax C400H cutting deck wont stay engaged I have a countax c400h ride on mower. it starts up ok and the cutting deck will engage but i have to keep the switch pressed on, as soon as i let go the ...

Countax c550 loss of transmission and cutting deck. My c550 will only slowly move when releasing the brake and when the brake is fully released the engine dies. I have replaced the seat switch and ...