Question about PIXMA MP130 All-In-One InkJet Printer
mode). 3. The Arrow to choose "Counter access" , press "OK" . 4. The Arrow to choose "ABC-M DOT Count" (or "ABC-P DOT Count" - depends on that, evidences what from counter = 100 ) and press "Copy" . 5
Question about BubbleJet i550 InkJet Printer
...mode on the canon I550? Okay, lets try it this way. There are multiple register types: page count register. Ink Absorber full Register. Ink level register. Data count (byte count register) What are ...
Question about ImageCLASS MF4350d Laser All-in-One Printer
...count on my canon mf4350d? 1. Press [Job Cancel/Status Monitor] repeatedly to select , then press [OK] 2. Press [] or [] to view the print or scan counts. 3. Press [Stop/Reset] to return to the ...
...count my page/print total in canon image classic 4350d 1. Press [Job Cancel/Status Monitor] repeatedly to select , then press [OK], 2. Press [] or [] to view the print or scan counts, 3. Press ...
MODE. Choose 3, EEPROM CLEAR Select 0, INK COUNT Press the Set button. Click Stop / Reset button (return to item 3), and again press the ON / OFF Hi, The error 5 is due to usage of refilled cartridges
mode 4) select 3 [eeprom clear] 5) select 0 [ink count] 6) press the [stop/reset] key (returning to the state of 3), and press the [on/off] key If that doesn't work try this one: 1) Enter service mode
...Copy, Copy Choose TEST MODE. Select 8 PRINTER TEST TEST MODE. Choose 3, EEPROM CLEAR Select 0, INK COUNT Press the Set button. Click Stop / Reset button (return to item 3), and again press the ON / ...
...TEST MODE. 3.Select 8 PRINTER TEST TEST MODE. 4.Choose 3, EEPROM CLEAR 5.Select 0, INK COUNT 6.Press the Set button. 7.Click Stop / Reset button (return to item 3), and again press the ON / ...
Question about IMAGERUNNER 6570 Copier
...canon 6055i copier is showing error code E000013-0001.i have switched off the copier for like trheee times. what do i do? Its on the rear bottom right, I believe there is two screws, remove the panel ...
...mode, the LEDs of the NEW FILE key and Count Only key illuminate and the address (U01-U10) and data (the last digit) appear on the counter display. 2) When changing the address, use the NEW FILE key. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions