...correction tape in make sure it is in the guides on both sides and also between the two metal fingers and the metal cardholder. Also make sure the ribbon goes in the same place.. The dull side of the ...
...tape and ribbon should both be between the two metal fingers and the metal cardholder. Push the black lever forward and look to make sure the two metal fingers are not bent into the printwheel. If ...
...coming up different from the keyboard. For example; J comes up $ etc. If this comes and goes remove the correction tap and try it, if that helps you may have a sticky L/O tape it should be dry. ...
...correction key it goes back and now types what was just typed but in backward order First be sure that the correction tape is the dry type, if it is sticky it will cause all kinds of trouble. ...
...correction ribbon? the spool with the new tape goes on the left side of the carrier, with the teeth pointed in. then the tape goes in the guides in the back of the black ribbon plate, and behind the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
