help do i load a fax face up or down to send Most faxes are face down. check the symbol on the paper input, there is a symbol of a paper with the left corner bent. This means face down
Question about Stylus CX4200 All-In-One InkJet Printer
...paper is pulled back out it is bent slightle in the lower right corner of the paper as looking at the printer from the front. From what I have been reading about this problem could be (Sheet feeder ...
Question about PIXMA iP1600 Printer
it. Any ideas? Try turning the paper around. Some times the corners of the paper get slightly bent and the paper wont load.If turning the paper around does not work, switch your paper. Hope this helps
Question about Photosmart C5180 All-In-One InkJet Printer
...paper, but now just wrinkling the left corners of the each printed document. Really annoying! Does anyone know why? I know several reasons, and they are all related to an obstruction of some ...
Question about Photosmart C5180 All-In-One InkJet Printer
...paper in the drawer could have bent up corners, not laying in there good and flat, Fuser rollers bad or uneven spring pressure, something could be wrapped around registration roller or something in ...
...bent or torn. It happens with an older one and a brand new one. All scanners have sets of rollers for paper movement. Sometimes, a small piece of paer can be stuck to the roller. This piece of paer ...
Question about PIXMA MP530 All-In-One InkJet Printer
...bent corner and I hit cancel, the third sheet printed first side and paper retracted. I saw the paper retract and it did not reappear. The entire 8 1/2 x 11 piece is in there somewhere. I have opened ...
Question about PIXMA MP530 All-In-One InkJet Printer
...bent Unless both feeder rollers went bad at the same time, which is unlikely, it must have something to do with the paper. It might be slightly damp, or not the correct kind. Try using high quality ...
Paper doesn't feed right most of the time. The lower right corner of the page gets bent on the way through the printer. I frequently see a lot of ink where the page gets bent up also. Can this problem
...corners of the paper are not bent, folded, or curled up. Try this fix. It is shown on a similar model Epson workforce 630. Best of luck to you! Paper jam in printer: Paper jam in Automatic Document ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions