Questions & Answers for: Homelite cord rewind

...rewind the cord, ull see clips on the bumper thats for when ur finished itll hold the line back in place so u can put it on without hassling with the cords, once u get the bolt on and tightened, give ...

...cord won't rewind my 26cc string trimmer model UT21509 will rewind the starter pull cord. I have taken mechanism apart for inspection and reassembled. Works okay without the shaft being attached. Not ...

...the cord around the wheel turning the wheel but not winding the cord on., do 3 or 4 wraps then pull the handle to get all the cord out and let it retract. if not enough rewind just repeat with 2 ...

...Remove the starter cover, rewind or wind a new cord onto the spool. Turn the spool about 2 turns against the spring, thread the pull cord through the starter cover and reinstall the pull handle. ...

After turning of engine. Starter pull cord stuck. The recoil spring that rewinds the cord may have broken of pulled loose from its mooring.

...cord. If the spring is unwound. Recoil Spring Rewind I invert and secure the starter housing and rewind the spring large coil to small (need eye protection and both hands). I am right handed so I ...

cord wont engage on weed eater remove the cover and check to see if any of the plastic or nylon parts in the rewind mechanism are cracked or broken or if there is dirt in the re-wind pawls...clean and

Gentlemen, I have a Mighty lite Trimmer of which the cord does not recoil. It appeares that the heavy torsion spring bends when cord is pulled and cord stays out instead of recoiling. Where can I get ...

i own a mighty lite trimmer and i keep putting cord on it and it always loosens up an slings off of it what size cord should i use i get maybe 5 minutes of use out of it before i loose the string are ...

...cord does noy have enough tension to rewind all the way You will need to take the cover off to get to the recoil, then remove the pull handle do not let go of the cord! Now ease the cord into the ...