Questions & Answers for: cord rewind

Ad

Question about U5507900 Elite Rewind Bagless Upright Vacuum

1 Answer

rewind suddenly only takes up about 2/3rds of the cord. I tried pulling the cord all the way out to the extreme and rewinding again, but it looses spring power with about 2/3 left. May have to replace

Ad

Question about Elite Rewind Bagless Upright VacuumVacuum

2 Answers

...cord pulled out, the rewind spring should be very tight. The mechanism may just need lubricating, or there is a worn or broken part preventing the spring from retracting the cord, or the spring is ...

Ad

Question about Lux 7000 Bagged Canister Vacuum

2 Answers

...cord in the rewind spring is off track and the spring and spool will need to be reset by opening the vac. If the cord will not budge either way , by now it has likely begun to twist and tangle.With ...

Question about Lux 7000 Bagged Canister Vacuum

1 Answer

...cord..It wont rewind but I can hear it trying to start It sounds like you did not properly rewind the spring that is behind the spool that the cord would around, that spring is what rewinds the cord ...

Question about Lux 7000 Bagged Canister Vacuum

1 Answer

...rewind. The cord should be removed from the spool entirely, then wind the spool spring CCW for a number of turns making sure the spool can be turned for about 6 turns more (during start). Wedge the ...

Question about S514 Solaris Electro Plus Vacuum

1 Answer

...by Miele. There IS a fix to the cord rewind, unless your model falls within the 5 year warranty. In which case contact your nearest Miele dealer for a replacement to the cord rewinder. Good

Question about UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

2 Answers

...sure but if you can get into the rewinder you can free up the cord it should go, hope this helps. Chris there is a recall on this

Question about UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

1 Answer

...cord rewind mechanism, untie the cord's knot in the center of the mechanism and remove the old cord by unwinding it from the pulley. Thread the new cord through the hole it goes through on the ...

Question about UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

1 Answer

...REWIND THE CORD WHEN PULLED. IS THERE A SPRING THAT SHOULD BE THERE TO REWIND IT . IF THERE IS WHERE DO I GET A NEW ONE TO REPLACE IT There is a spring there you don't need to buy one use the old ...

Question about S514 Solaris Electro Plus Vacuum

1 Answer

how to rewind the power cord assemble? The only way to rewind the cord assembly is to take the cord real out of the vacuum and rewind it and put it back in. There is no easy way to do it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...