...Nortel Norstar Telephone System Hi There. I sure hope you can help. My boss purchased the above-note telephone system and (briefly) had a receptionist who programmed two mailboxes. Since that time, ...
...least one intercom by default. Lines are assigned in most Nortel systems in Terminals & Sets. Your COPY command is your friend. Just pick a phone you wnat to emulate and copy it to your new set. ...
Nortel system has 2 lines and that's all. Go into system programming and assign the number of lines and intercoms to a phone. After that, you can copy the buttons from a working phone to the new phone
into line appearance for all the extensions and make them "appear and ring" If you find it, you can copy that programming from the phone that is already ringing
Question about T7316E 2-Line Corded Phone
...Sets. Press the Show button. It should ask the for extension number, so enter the extension of someone whose phone is working properly. Press Copy It'll say "Copy SystemData" Change that so that it ...
Question about T7316E 2-Line Corded Phone
...that is the closest or same as what you want... F**CONFIG ... Terminals&Sets ... (enter "good" extension #) ... COPY softkey ... (destination extension) ... System&User ... and you're
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions