Question about ML 2010 Laser Printer
...page fro top to bottom- replace drum assy Drum has been exposed to light faint or blank across copies repeated 4 times down page - replace drum assy or upper fuser roller stuffed, down page, smudgy ...
...poor customer service. My copy its coming out faded in the center of the text. There seems to be a swath from top to bottom in the middle of the page that is faded out. It seems to be on black
bottom, copy quality is still good, looks like rollers are dirty, not on every page Sounds like the wiper blade in one of your cartridges has failed. Try swapping cartridges and see if this helps. The
Question about Photosmart C3180 All-In-One InkJet Printer
...copy (scan) of a document, the page came out blank. I kept trying, and the photosmart sounded and acted like it was working properly, but pages still came out blank. I left it alone for a couple of ...
...fades about half across page to nothing, if you print from memory no line, if you run origional thru adf no line, What is causing this line when origional is placed on glass, Note glass is squeeky ...
copy but about half the copied page is faint or less dark. Is this a fuser problem? Also toner has been somehow spilling out and falling into the bottom of the copier. We have checked and replaced the
...fades to almost nothing at the bottom of the page. Adjusting light/dark settings either bleeds out the whole image or causes Shading. What may Cause this? What can I do to fix the problem? Have you ...
...copy of the colour laser test page found here.The colour bars towards the bottom of the page separate cyan, magenta, yellow and black. Hopefully you will be able to notice that one colour is affected ...
bottom to top of page. All other printing is fine. I believe it happened after the printer mislined the paper feed into the machine and jammed. I yanked the paper out and am think there may be damage.
...copy of the problem? can the faded part be rubbed off? if so its your fuser that needs replacing - very expensive. if it doesnt then in tray 1 you have a flap at the front of the tray with a laser ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions