Questions & Answers for: coolant reservoir pt cruiser

...coolant reservoir Can I add Prestone 50/50 antifreeze in the engine coolant reservoir? yes as long as u use the new log/extended life coolant your car calls for, 50/50 is correct mix for all ...

...wiper fluid. So, I do not need a special engine coolant, I can use the same antifreeze (Prestone 50/50) I put in the radiator, in the engine coolant reservoir, right? Thank you. yes that's correct ...

...coolant fill. The radiator has water, however the reservoir needs to be filled daily. Doesn't appear to have any water under car except for A/C. What could the problem be? bad head gasket. take your ...

...coolant is at the add line There are two hoses on an Antifreeze reservoir tank. One is to allow escape in case of unexpected back pressure or overfill of the reservoir. The other will be a hose that ...

...coolant fill reservoir, but ONLY while idling. While driving at highway speeds, the temp indicator stays at halfway (even in 102 degree F ambient temperature). This began after Goodyear did an oil ...

...Coolant starts to bubble back into the reservoir. Car stops running, Cooling system is now down about a gallon, but there is nothing on the floor or the ground. After filling the radiator, the engine ...

...coolant reservoir makes a gurgling sound and boils Have a coolant pressure test done. Have a compression test done to check for head gasket/cracked head. Check that cooling fans are working. Have a ...

...coolant in reservoir. Seems like something draining it for sure. Unrelated, was in an accident couple of months ago ... Have no low beam on right headlight, and rear right taillight has had bulb ...

...coolant escape into the reservoir. If the reservoir is full, it will overflow. Also, check the coolant level in both the radiator and the reservoir when the engine is cold. Fill the radiator to the ...

...Reservoir cap for coolant) The coolant is bubbling/boiling but the thermostat says everything is ok. What am I missing or overlooking? Blown head gasket/warped head due to overheating. possibly air ...