Questions & Answers for: Hitachi convergence ic

Ad

Question about 43UWX10B 43" Rear Projection Television

2 Answers

Convergence IC's? I suspect my Hit. 43UWX10b (5 yrs old) requires new Convergence IC's as the several colors are bleeding down and to the left. How many convergence IC's does this model require if I ...

Ad

Question about 53UWX10B 53" Rear Projection Television

1 Answer

...convergence IC problem. I purchased and replaced the convergence ICs. Now when in the grid, I cannot get the red to align. It looks okay in the center, but gets way out of whack on the edges. Any ...

Ad

Question about 43UWX10B 43" Rear Projection Television

2 Answers

...convergence IC's have gone bad. These IC's operate at a very high temp, and usually only last 4-5 years. If you remove the back of the set, you will want to look for the BIGGEST heatsink in there, on ...

Question about FDX Series 43FDX10B 43" Rear Projection Television

1 Answer

...line is wavy ,not strait, and will not move. What could be the problem? Thank you. Jesse James convergence Ics you will need two STK392-120 convergence ICs. You can get replacement ICs at the ...

Question about 51SWX20B 51" Rear Projection Television

2 Answers

...Convergence IC with a 150? Just received my "convergence kit" and it has one of each convergence IC's but my TV has 2- 110 IC's. Can I replace one of them with the 150 or will this mismatch cause ...

...IC problem. convergence board would have to be removed -than remove and replace 2 STK IC's and check the surrounding resistors. Convergence is dead.U know how to solder?Tries these websites Tv Repair ...

Question about 43UWX10B 43" Rear Projection Television

1 Answer

I can set convergence lines on red and blue lines. the I can set convergence lines on red and blue lines.the green line breaks away from convergent line Replace both of your convergence ICs they are ...

Question about 53FDX01B 53" Rear Projection Television

1 Answer

half the screens convergence is out..whats up with this Ur convergence is dead.The 2 convergence ICS is dead,and some or all the resistors.Must replaced the 2 convergence ICS and all the ...

...IC chips and three resistances on my Hitachi TV to fix color alignments. Now the problems is that yellow and blue double image are seen at the bottom of my screen with no much effect on the rest of ...

...projection tv. The colors are shifted and droop downward. the cross hairs don't move when I try the convergence adjustment. Will new chips fix the problem? If trying to adjust the convergence doesn't ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hitachi Televison and Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76060 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...