Questions & Answers for: convergence ic

Ad

Question about AV-48WP30 48" Rear Projection Television

2 Answers

convergence IC's are bad then you will have access to the convergence menu but the adjustments will have no effect. The fact that you switched the IC's and got the same results shows that the IC's are

Ad

Question about 42H81 42" Rear Projection Television

1 Answer

Convergence Output IC Failure Corrective Action: Replace the defective Convergence Output IC Part Number 23905094 (STK392-110) using the revised ?T? version IC Part Number 23135090 (STK392-110T). When

Ad

Question about AV-48WP74 48" Rear Projection HDTV-Ready Television

1 Answer

menu but did not work. ? You need to replace STK ics which are convergence ICs in your tv You can get from the link below Click this link to get convergence IC It will cost you $20-30 to buy these IC

Question about GB4308 43" Rear Projection EDTV-Ready Television

1 Answer

...to replace convergence IC . YOu can get from the link below . Convergence ICs You need to replace both convergence ICs .It will cost you around $30 . The IC number is STK392-110 . Hope this helps

Question about VS-50705 50" Rear Projection Television

1 Answer

...to replace convergence IC . YOu can get from the link below . Convergence ICs You need to replace both convergence ICs .It will cost you around $30 . The IC number is STK392-110 . Hope this helps

Question about GB5108 51" Rear Projection EDTV-Ready Television

1 Answer

...convergence ic's...still a converg on Apex GB5108 Replaced convergence ic's...still a converg problem this was the second set of ic's..please help did you replace the low ohm feed resistors with the ...

Question about PT-56WXF95 56" Rear Projection Television

1 Answer

had convergence problem; replaced 2 stk392; panasonic pt56wxf95a : had convergence problem; replaced 2 stk392; resulted in bowed image; now tv shuts itself off after high beeping sound, no front ...

Question about KP-57WS510 57" Rear Projection HDTV

1 Answer

...convergence IC goes bad or the fuse going to the convergence ic goes bad. Pico fuses they are called sometimes open up. You may want to open it up and pull the board out and check the solder ...

Question about 42H82 42" Rear Projection HDTV-Ready Television

2 Answers

...double picture and the colors are off. When trying to auto focus the blue lines are wavy. Replace Convergence ICs ,Big black ICs will have PN# on them example STK 392-110 Mats has ICs

Question about 42H82 42" Rear Projection HDTV-Ready Television

3 Answers

convergence IC is already defective. Replacing this convergence IC will solve the problem. In locating this convergence IC you should remove the back cover of your unit but be sure to unplug it before

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76046 Answers

Cindy Wells

Level 3 Expert

5865 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...