Questions & Answers for: controll panel amana front load

Amana model LW8203L2 and would like to repair/replace the mixing valve. I think the lid should raise to allow access to the valve, but it is not coming up very easy. I don't want to damage anything so

amana front load washer NFW7200TW so i can get to the door lock To get the front off. (All screws look to be #2 Phillips Screws) 1. You have to unscrew (2) phillips screws from the back that holds the

...panel lights up but it won't spin or drain. It filled with water for the last load of wash but then stopped. I emptied it, thinking the clothes (jeans) were too heavy but it still won't do anything. ...

panel. My washer was 4 1/2 years old and was shot. To repair this was $479 for parts and labor, I replaced with a new Amana front load washer for $496.00. Glad I had AHS home warranty only cost me $60

Amana washing machine (ALW880QAW). Does not work in spin cycle. Washer works ok in wash cycle, and in draining water, just the new belt is too loose when it switches to spin. It just burns up the belt

amana front loading washer won't run after power outage. Panle does light up. we had a power failure at our house. The front panle said PF on it. Now when you turn on the washer every thing lingts

...Amana NFW7200TW washer The 3E error code pops up during the rinse cycle, I can watch the motor trying to turn the drum and failing, makes about a 1/8 turn, gives up and settles, like the load is too ...

...Amana front loader washer is acting very erratic. Sometimes it will go through all cycles fine, others the drain pump will start running at around 14 min left and never shut off, even when it is ...

...front panel is a tech sheet it will tell you how to place the unit into diagnostic and read the lights for an error code recheck your connection at the control board a flashing lid lock would should ...

panel, 2 screws, take the pump hose loose and drain the washer, this is going to make a mess and the washer will be heavy, then you can see of the cycle charges or it fill again, im thinking the timer