Questions & Answers for: control board locked microwave

...into the keypad and sometimes onto the control board. This could mean that they control panel frame with keypad (membrane switch) would need to be replaced. Can you give more details on the

control board. All locations, and description of this parts can be located using the diagram here: Counter top. Parts must be tested to find out what is wrong. Remember that microwaves are potentially

...because of the interference caused by magnetron on control board circuits. This is also quite common. The control pad or control board are the parts that are most commonly causing this

control board ("microcomputer" part number W10166798) here for $74.30 plus shipping. At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in

on. can not use key board to set times. F-2 showed on display. Tried to un plug but same thing happened. F2 usually means the control panel is faulty. Replace the control panel should fix your problem

...control circuit board. For model MH7140XFQ0 the control circuit board would be part number 4393919, which you can order from the Pros here for $132.23. At our Web site, we have a video available ...

...control circuit boards and displays are repairable, in this case, you may be better off replacing the board.The part number is 6871W1S387A and you can get it from the Sears Parts Direct Web ...

...control board.. Cheaper to buy a new one microwave unless you can find a replacement board and do it yourself... tell me what you want to do and I can walk you through..board is about $100 if you can ...

my samsung microwave shows se and is locked how do you unlock it The keypad has a short in the membrane, the whole keypad control board should be replaced.

...intermittent beeping stops. The instructions to turn the child lock feature you have it in the owner manual . The child lock disables most keypads. otherwise replace the control board. God bless ...