Questions & Answers for: continual flashing washer motor

Ad

Question about Elite 45986 Front Load Washer

1 Answer

washer keeps giving me a F 20 what does this mean? Low or no water supply, hot or cold side or water pressure switch not switching over to indicate fully filled though if this happens drain motor will

Ad

Question about Elite 45986 Front Load Washer

2 Answers

...washer's indicator lights 2 & 4 were flashing. I've tried reseting the machine, turning it off and back on and the lights remain flashing. Any thoughts? it could be a burn fuse on the control ...

Ad

Question about Aquarius WD640 Front Load Washer/Dryer

1 Answer

when i start to wash it says end then flashs saying fo1 faulty motor triac. check motor & pcb connections. if wiring has continuity from motor to pcb, then the Pcb is Faulty

Question about Duet GHW9150P Front Load Washer

1 Answer

...motor and do a continuity test. 3. Plug in washer or reconnect power. 4. Check the MCU by looking for operations of the drive motor. 5. Check the drive motor for powered rotations. 6. Replace MCU ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...motor windings in the washer. This could be caused by overloading the washer. It can also be caused by problems with the drive motor, thermal protector or the motor controller. You should have been ...

Question about Elite Oasis 27052 Top Load Washer

2 Answers

...motor rotor position sensor (RPS) senses no rotation. This machine is a whirlpool calypso washer with Kenmore's Logo on it. Click HERE for a service manual if you decide to repair this yourself. If ...

Question about Aquarius WMA42 Front Load Washer

1 Answer

...same thing continues, there is possibly a motion detector on the motor which indicated with light flashing you can open the door. Check the connections on the motor. Otherwise board is

Question about Calypso GVW9959K Top Load Washer

1 Answer

...washer keeps stopping and is flashing C1. Can you tell me what this means The CL fault indicates that there was an instantaneous current spike of 26 amps at the motor windings in the washer. This ...

Question about Calypso GVW9959K Top Load Washer

1 Answer

...motor windings in the washer. This could be caused by overloading the washer. It can also be caused by problems with the drive motor, thermal protector or the motor controller. You should have been ...

Question about WBSR3140GWW Top Load Washer

1 Answer

...washer (WBSR3140GWW) is not doing anything. It's flashing a green light continuously. I've tried the reset method recommended on GE's website but it doesn't seem to be doing anything. I've even tried ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

Brad Brown

Level 3 Expert

18067 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...