Questions & Answers for: connecting floor monitors mixer

...floor on the connections do you connect the speckon cables to each A and B port on the back of the PMP 6000 power mixeran to each main speaker and if so where do the 1/4 TS connectors from the mons. ...

floor monitors. Thanks, DO NOT connect your in-ear monitors to the power amp out using the MAIN/Mon speaker option as it would be goodbye hearing and fried ear buds.. Get a very small and in-expensive

floor monitor to add too the system. I know not to hook it up too the speaker outputs on the back of the mixer. So where do I hook up the powered monitor too the mixer? You will plug an UNBALANCED 1/4

...connecting it to my Behringer xenyx 2442fx mixer You will have to have an amplifeir between them since the PV12M is an unpowered speaker. The Xenyx 2442FX is likewise an unpowered mixer meaning it ...

...floor monitor to mixer You need to connect the speakers using an XLR cable into the Main output jack on the back of the mixer. If they are powered speakers you will need to connect them into a power ...

...floor monitors in front and one for the drummer. Have experienced some monitor feedback issues in the past with our other mixer and was hoping to solve that with the EMX5016cf. I hear complaints in ...

...floor monitors to mixer and amp I have a PV14 non powered mixer, a pyle pro 4100 amp and two non powered floor monitors. How do I connect the monitors to the mixer and amp? No knowledge of this stuff ...

floor monitors in to the monitor mix on the pmp 2000 i get no sound or little sounds When I plug-in the monitor speakers no sound or little sound If you are referring to the "monitor" output , this is

...mixer. There are 4 output jacks on the back for speakers. Which ones do I use? I have 2 Behringer B215XL speakers. I also want to use a floor monitor for the singers. A little help? Connect the two ...