Questions & Answers for: connect wharfedale sw150

too much bass...low end i have sw 150 and hooked it up to my denon dab 37. problem is too much low end bass....any ideas? Hi, have you tried adjusting the "subwoofer level", and or the "subwoofer cut"

...speaker if you do anything to cause a pop. If it pops while watching a movie or with music, check connections. I believe the manual says left input is the recommended one. Is the + - correct? Are ...

connect my floorstanders to wharfedale sw150 without any external amplifier, If so, how ? What 'floorstanders'? Its internal amp is for its own subwoofer ONLY, but if you use your own amp's full-range

WHARFEDALE DIAMOND SW150 SUBWOOFER does not work. the light (red) comes on when connected. but no sound. I've tried direct from speaker and from receiver connection. doesn't work. Any advice I had the

...with the 2 main front left/right speakers? input and output are for low level ( as with RCA cable connectors) ,, the speaker connections are for high input, (red and black connections. ) you can

...exact model you have it will at least get you started as subwoofers are pretty much teh same for connection and operation. http://www.wharfedale.co.uk/Portals/0/PDF_Data/Manual/DIAMOND9_range.pdf ...

Wharfedale SW150 subwoofer? Power light goes on, all connections are fine but internally i can hear it doesn't switch on. I opened it up one day, couldn't find any obvious fault, closed it

wharfedale sw150 subwoofer cuts out in normal viewing, any suggestions I have my wharfedale SW150 Connected to a Sony 580 amp, LG T.V. and sony sateliite surround speakers, after abt 30mins of viewing

...connect sw8 sub connecting a specker to the sub The SW8 and SW150 have line level and speaker level inputs. It has a line level output, which will not drive speakers without using a separate amp for ...