Questions & Answers for: how to connect camcorder to tv

...connect the camcorder to the TV or VCR using an S-VIDEO cable. Since the S-VIDEO cable only transfers video, you will also need to use an audio cable. Select the S-VIDEO input on your TV or VCR to ...

...TV I Connected My Camcorder To My Television But Cannot See An Image. The camcorder should be connected to the TV's A/V input jacks using the A/V cable supplied with the camcorder. Turn on the TV and ...

...camcorder? connect a lead via your tv video out audio out jacks. Select tha appropriate channel (You may have to go through the av channel on you tv and tune in the channel you want to record) or, ...

connect the camcorder to the 'red' 'white' and 'yellow' phono terminals (the round ones' on the TV using the lead supplied with the camcorder press 'play' on the camcorder and press the 'AV' button on

camcorder on TV, but when I try and tape it on the VCR, nothing is happening. I have tried connecting the camcorder directly to the VCR, but that doesn't work either. I know that my VCR works, because

veiw on our TV? camcorders have component or hdmi or Svideo port check that whitch one is on your TV and cam,them connect them; put yor tv on AV channel and camcorder on Play mode. I hope this helps..

...connect my sony dcr hc 21e with the tv can someone help me please..... mogie naiken almost all of camcorders has a cable connection to the tv. check your camcorder if it has or buy on some electronic ...

...TV (supplied with the camcorder). I could then get the audio ouput on TV but there was no video. I then connected using the AV remote connector cable (supplied with the camcorder) which only relays ...

camcorder and then has three RCA connections 'Video - yellow', Audio Left 'Red' Audio Right 'White' that you can take and connect to many of the newer style and even older TV sets 'Aux inputs' located

...Connect the Camcorder to the TV using A/V cable. Yellow, Red and White combination on the TV side. Probably a single connector in the Camcorder side. Once you make the connection, switch on the ...