...2.. You will not need to tune in the TV just go to the AV or HDMI input source to obtain the sky channels. if you have been given one of the newer units, use hdmi only - it carries audio and video ...
...tv. HDMI connection Number 2 between Bose media centre and DVD. HDMI connection Number 1 between Bose media centre and Humax. I am also connecting an optical cable between the DVD and Bose and Humax ...
...2. Connect output 1 from the splitter to the Humax receiver 3. Connect the Humax receiver to the TV with an HDMI cable 4. Connect output 2 from the splitter to the DVD 5. Connect the DVD to the TV ...
...1* You are connected to a suitable satellite dish and are receiving the all of the freesat service. 2* The signal strength and quality are at a high level; if you are experiencing problems with the ...
connect this device with HDMI at port 2, 3, 4, only at port HDMI 1 i will get audio on the T 758 and video on my TV. Is there a explanation for this? Same kind of manner for my Humax cable set up box,
Question about FOXAT HDR DTV Receiver
...TV downstairs the signal strength and quality is very poor on tuner 1 10/50% but great on tuner 2. Any help would be appreciated. I suspect that the box upstairs is a Freesat box; a Freeview box ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions