Questions & Answers for: configuring ports on router

ports on the other router to the wan port of this router. Configure this router to obtain ip address automatically (like it would be configured to connect to a cable ISP) Turn off DHCP on this device.

Lost installation cd have not installed router yet and do not have the installation cd sowtware. Connect the computer to the LAN port of the router, connect the modem to the Internet/ WAN port on the ...

.../ how to open firewall/router port Guide to Open or Forward Ports for Utorrent and Azureus BitTorrent Port Forwarding for the Netgear WGR614 Tweaking your system to get the most out of ...

...You can simply open the ports by going to the router's setup page http://192.168.1.1 no username and password is admin. You can do it under Applications and Gaming tab, Port Range

...Configuring port forwarding is actually pretty easy, once you know the commands. Type show ip interface to find the name of the interface you want to set port forwarding for. The show ip nat ...

router and enable these ports if they are not enabled already enabled. (if your router is in fact blocking this ports this where the blocking happens) unless there's a good reason for you to configure

...ports on the wireless router/access point to a LAN port on the Router. Configure the SSID and any security settings on the wireless PCs to match the wireless router/access point's SSID and security ...

...for better internet gameplay? log into router and enter the ports used for whatever games into it for direct feed to speed up these ports. Check the game web sites for the applicable port

...configuring the router? I can't quite understand from the manual on the cd what I may be doing wrong. ??? Typically wireless routers have one port labeled WAN and four additional standard network ...