part of the way up. Try the unit without the ribbon installed if the mech. seems to operate properly you may only need a new ribbon. If the condition continues you may need a new ribbon motor or board
condition ribbon out on my zebra plus printer. I open the cabient and I do not see a ribbon. Just the media paper is there. Where can I find the ribbon in the printer or if this is not a correct error
...condition P3/P5. One of the ribbon guide bar screws had loosened and allow the ribbon to drag on the ribbon sensor. After trying the alcohol wipe trick mentioned on this site the error condition ...
condition ribbon out in ZM400 while printing test page in ZM400 printer it was showing Error condition ribbon out in that printer screen In the printer setting- Change the Print Method from - "Tharmal
...condition ribbon out and then Printer Idle V60.13.0.13Z The power light is green and solid the error light is blinking the check ribbon light is on solid and the pause light is on solid The printer ...
...ribbon out" condition before that happens. When the usable ribbon is out, either cut the ribbon or pull the end off the spool, unlock the printhead, and pull the ribbon tail through. You will need to ...
Question about 2600 Electric Typewriter - Tested In Working Condition
swintec 2600. Ribbon is not advancing properly. Types in same place randomly. tried new ribbon You may be in the overstrike ribbon mode. Try code and . , or / one will get you out of the ...
Question about 2600 Electric Typewriter - Tested In Working Condition
...240 DLE: Changed ribbon. The lock light is blinking and the keys are locked Changed ribbon. The lock light is blinking and the keys are locked That's an error condition. Did you use the right
Question about 2600 Electric Typewriter - Tested In Working Condition
ribbon out condition when there is ribbon there, how do I fix this? Recalibrate the printer, Verify that you upper media guide(snap plate) is installed in the machine. Then replace your ribbon sensor.
Question about 2600 Electric Typewriter - Tested In Working Condition
...condition. 4. Try an alternate ribbon. On very rare occasion, one of the ribbon RFID tags is missing or corrupted. The likelihood of 2 separate ribbons having the same issue is very small. 5. The ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions