Questions & Answers for: condenser mic set

Ad

...MIC 1 CO2H MINI PENCIL CONDENSER HOW DO I SET THE LEVEL ON MY MIXER TO GET THE RIGHT SOUND OUT OF MY DRUM SET I HAVE A 24 BIT EFECTS ON THE MIXER ALSO ( SAMSON 900W POWERED MIXER XM910 24 BIT DSP ...

Ad

Question about C01U - USB Studio Condenser Microphone Consumer Microphone

1 Answer

...mic (co1u USB Studio Condenser) and try to record in sound recorder and the sound comes out garbled and fast. Any ideas? open up the sound icon on control panel...select recording......select samson ...

Ad

Question about MXL 990/991 Recording Mic Duo and Audio Buddy Package Microphone

1 Answer

condenser mike connected to an M-audio Buddy connected to a Peavey 200 ohm amp. I cannot increase the gain on the preamp or the amp without tremendous feedback Hey I Have These Mics They Work Awesome.

Question about C01U USB Condenser Microphone Microphone

1 Answer

...set the mic as my default input and try to record, the whole program stops responding and I end up having to restart it. Please help! Try to disable your laptops build in mic through the recording ...

Question about C01U - USB Studio Condenser Microphone Consumer Microphone

1 Answer

...condenser mic I am recording a podcast in Garageband on iMac OSX leopard. Recording with the internal mic is fine, no problems just rubbish quality. Bought a Samson C01U USB condenser mic and ...

Question about C01U - USB Studio Condenser Microphone Consumer Microphone

1 Answer

... it's plugged in, the recording software is set to line in. how do i adjust the mic settings? If you are using a condenser microphone, it's need phantom power (48v) to activate the mic. Hope this ...

Question about 990 Professional Microphone

1 Answer

...condenser mic,when i hook it up i hear a rumbling sound like thunder,i try different cable,and mixer and i still hear the sound.any know whats the problem? perhaps there is agrounding issue or the ...

Question about ULTRAGAIN PRO MIC2200 2 Channel Tube Mic Preamp Microphone

1 Answer

...middle. and appropriate switching on/off of (phantom power) +48volts. this option is required for condenser mics but way too strong of a signal for normal dynamic mics,like the shure SM 58. or any ...

Question about Blue Bluebird Condenser Microphone Microphone

1 Answer

...condenser is plugged into the Mic/Line input. (Input 1 on the back of the mbox mini). All condenser mics require phantom power, so engage the +48V switch. Also make sure the DI (direct input) switch ...

condenser mic set to phantom-mic this gives the mic power , but I will caution you to watch you units power ind as with that setting you battery will drain down quicker than usuall , you will get best

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76125 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...