...CON board get the power from the logic board switched transistor that supplies the voltage to the T-CON board. Check to see if the 12vdc feeding the T-CON board is clean voltage and not higher than ...
...CON board. It could be a bad connection of the cable from the LCD to the T-CON board. or the T-CON board could be bad. Sometimes you can disconnect and reconnect the flat cable(s) to the T-CON board ...
...CON board. If this set is under warranty you should return it to get it repaired/replaced by the seller. IF YOU KNOW HOW TO WORK WITH ELECTRONICS REPAIR(board replacement ) or have a friend with ...
Question about BRAVIA KDL-46W4100 46 in. LCD HDTV
...con board. The t con board drives the Pixels in the lcd screen . If there is some problem with the t con board then this can exibits such problem as you mentioned. Normally you can find the t con ...
Question about BRAVIA KDL-46W4100 46 in. LCD HDTV
...con board. T con board is one which drives the pixels of the LCD panel. If any of the driver satge in the T con board is faulty then this problem can occur. Some times bad contacts on the connections ...
Question about BRAVIA KDL-46W4100 46 in. LCD HDTV
...CON board it have some kind of a shorts in it circuitries parts to project this kind of a picture to the LCD screen panel to have this problems.The T-Con board sit in the middle of the bottom of the ...
Question about Bravia KDL-46V4100 46 in. LCD HDTV
...con board. T con board is one which drives the pixels of the LCD panel. If any of the driver satge in the T con board is faulty then this problem can occur. Some times bad contacts on the connections ...
Question about Bravia KDL-46V4100 46 in. LCD HDTV
...con board is faulty. T con board is the one which drives the lcd pixels. Chekc the video to identify the t con board. Also try to remove the connection to T con board and reconnect it. some times bad ...
Question about Bravia KDL-46V4100 46 in. LCD HDTV
...con board is faulty. first you have to check is there is any bad contact in the connections on the t con board. Remove and reconnect all the connections on the con broad. if the problem exist even ...
...con board is faulty. first you have to check is there is any bad contact in the connections on the t con board. Remove and reconnect all the connections on the con broad. if the problem exist even ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions