Questions & Answers for: computer settings

Somewhere In there It Should Give you The Option To Set the Computer Settings To Defalt. I bought a company computer and it does not have access to control panel, Hoe do I restore the factory settings

...settings. Hope this helps you get your computer running again. open up your cpu remove cmos battery start your computer for 5-10 secs.. now switch of cpu and put the battery again in it and start ...

computer. -Settings for hard disk drive are not correct. -Floppy diskette or CD in computer causing issue. -Boot devices not set properly. -BIOS corrupt or misc. setting not set properly. -Connections

settings. The computer will begin restoring all settings. Don't disturb your computer, as this process can take several hours. . Step 4 Reboot the computer to complete the process. How to Reboot Using

...sounds like your account settings are set to one computer. Log into facebook on the computer you can. click on account and then security (i think) its defo in account settings and change the

...of my vaio laptop is does'nt working only the head set one . If you have head set connected to computer the computer speaker will be functioning thorough head set and you will not hear sound

...computer shuts down? If so, Open the computers Control Panel, Power Options, set to High Performance, open Change Plan settings, set Display and Hibernate to NEVER in Plugged In, open Change advanced ...

...settings in your computer is easy. Click on the computer's start button. Find the Control Panel option and select it with your mouse. Select Power Options. You will see several options. There should ...

...Settings-- IP: 10.20.40.249 Subnet Mask: 255.255.255.0 You did not say where are your two computers. Anyway, computers should work on most subnets routes except between 10.20.30.0 and 10.20.40.0 ...

...computer's BIOS settings. This is probably not where your problem is, but you can access the BIOS settings by pressing Delete or F2 when the computer is first starting up. If you press the Escape key ...