Questions & Answers for: computer relearn gmc envoy

...computer needs restarted or if it just so happens the o2 sensor died at the same time Usually when you boost a gm , they have to go through a relearn stage this should be solved after driving it and ...

...with throttle body cleaner with the battery disconnected. When finished, drive it for 5 or so miles with the defroster / AC off to let the computer relearn the settings. This will solve your

with a problem like this is to clean the throttle body. Make sure to disconnect the battery when doing this procedure because it will cause the computer to reset and relearn with a clean throttle body

...computer just throw that code , if battery where drain or disconected you will need to take your vehicle to a dealer and have them perform throttle relearn or a reputable shop with a compatible scan ...

...to clean both the front side and rear side thoroughly. Also, disconnect the battery while doing the cleaning, this will reset the computer and allow it to relearn to the newly cleaned throttle

...this means that the throttle body needs to be removed from the intake. Also, disconnect the battery while cleaning, this will reset the computer and allow it to relearn to the cleaned throttle

...sides of the throttle body are thoroughly cleaned. Also, while the cleaning takes place, the battery should be disconnected to reset the computer and allow it to relearn to the cleaned throttle

...and back side are cleaned thoroughly. Also, the battery should be disconnected while the cleaning takes place, this will reset the computer ans allow it to relearn to the newly cleaned throttle

...the throttle body on a 2006 gmc envoy I have cleaned a lot of throttle bodys on GM and Fords and I never have had to relearn the computer. If it is idling a little fast, drive it for a little

...chugs a little at 2000 rpms? Did you disconnect the battery? If so, the computer lost it's keep alive memory. Takes about 10 cold starts to relearn everything. OR, you forgot to replace a vacuum