...monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: Turn off both your computer and the monitor. Unplug the ...
...monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: Turn off both your computer and monitor. Unplug the video ...
Question about E173FPb 17" TFT LCD Monitor
...and if it is fine then the problem is with the connector in the tower because monitor is absolutelt fine. no issue with the monitor how to fix my computer shows me self test feature ...
...computer is showing a floting box which say self test feature check, wit red,green blue and white box.What do this mean its showing u monitor self test feature screen issue either with the monitor ...
monitor signal cable from the back of the computer (cable with the blue jack) A self test feature check would run on the screen. If the screen is bright in the feature check . The monitor has gone bad
Question about E152FP 15" Flat Panel LCD Monitor
...monitor. The computer is on but the only thing on the screen is that box. How do I get the actual picture to come up and get rid of this self test feature box? Ensure that the monitor cable is firmly ...
Question about E172FP 17" LCD Flat Panel Monitor
...monitor is blank it just keeps saying self check its a dell flat screen Hi, If it shows "Self test feature check" the cable (VGA / DVi ) is unlplugged on the computer/ tower. Check the cables it may ...
Question about E152FP 15" Flat Panel LCD Monitor
...monitor and computer to ensure they are secure. If the connections are fine, try performing a monitor self-test by disconnecting the video cable from the back of the computer and turning on the ...
Question about E228WFP Monitor
...monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: Turn off both your computer and monitor. Unplug the video ...
Question about E228WFP Monitor
...to and from the monitor. There will be 16 pin connecter. Make sure the pins are not damaged bent or broken. replace with same cable. Go to your local computer store and buy new cable. Good
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions