the light will return so the only way to keep the light off is to properly repair the reason it was commanded on in the first place
..., Transmission shifter cable misbehaving, or the transmission it self is failing to lock ur given
...Leak Test This tests for large leaks and blockages in the EVAP system. The control module will command the EVAP vent solenoid ON, closed, and command the EVAP purge solenoid ON, open, with the ...
...cam system" performance problem. Be sure you are running the correct oil for the car. 5w30. The "commanded" and the "actual" parameters are not matching. So there could be a cam solenoid problem.
...determines that a lock or unlock function is permitted, it sends a class 2 message back to the DDM commanding the DDM to perform that function. The DDM then sends commands to the rest of the door ...
Question about 2001 Bonneville SSEi
...to NOT READY. Depending on year of vehicle, you are allowed 1 not ready with no check engine light commanded to pass. The vehicle needs to be driven to rest them to READY. Each manufacturer has ...
fail mil command status 2000 pontiac grand am se? failed emissions due to mil command status That means the check engine light is on.
Question about 2000 Grand Am SE
...in the following order: When in the disarmed mode, ignition is OFF and any door is open the RIM commands the instrument cluster to flash the SECURITY indicator via the class 2 serial data
Question about 2000 Grand Am SE
update 2005 Pontiac vibe , giving faults codes p0351,p0352,p0353,p0354,replaced p0352 coil . car running great. It may run fine but it's in fail safe mode DTC P0351-P0354 DTCs P0351 through P0354 ...
Question about 2000 Grand Am SE
...system will consider itself malfunctioning. The VTD system will enter a fail enable state and will command the security indicator to illuminate. When the VTD system is in a fail enable state, the ...
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,435 Questions
1,496 Questions